Installation location
•
Do not install the machine in any of the following locations.
(1)
Those subject to direct sunlight or any bright location such as by a window (If you must
install in such a location, put a curtain or the like over the window.)
(2)
Those where the temperature changes drastically
(3)
Those that are too hot, cold, humid, or dry
RECOMMENDED:
Temperature range: 15° centigrade - 30° centigrade
Humidity range:
(4)
Those with radiant heat sources and any locations in the direct path of air from air condition-
ers, heaters
(5)
Any poorly ventilated location
(6)
Dusty atmosphere
(7)
Any tilted location
(Installation height difference: 10 mm max. front - rear, 10 mm max. left - right)
Electrical connection
•
Plug the plug securely into the socket so that there is no problem with the contact in the power
supply plug section.
•
Do not use any triplets or extension cords.
•
Do not allow any other machine to stand on or crush the power cord.
Ground connection
•
Always ground this machine to prevent electrical shock in the unlikely event of electrical
leakage.
40% - 70% No condensation allowed
1 – 7
RN (Version 1.0)
CHAPTER 1. MAINTENANCE
WORK PRECAUTIONS