CHAPTER 13. MASTER MAKING SECTION
REMOVING THE THERMAL PRINT HEAD
5.
Removing the Thermal Print Head
(1) Lift up the Master loading unit, and remove the Master loading unit bottom cover [A]. (Screws only
need be loosened.)
(2) Remove the mounting screws on the TPH bracket [B]. (M3 x 6: 2 pcs)
(3) Remove the ground lead mounting screw. (M3 x 6: 1 pc)
(4) Unplug the two connectors, and remove the Thermal print head together with the TPH bracket.
A: Master loading unit bottom cover
B: TPH bracket
A
B
13 – 16
RN (Version 1.0)