Removing The Ink Cartridge Set Switch Pcb Mounting Bracket - Riso RN SERIES Technical Manual

CHAPTER 8. PRINT DRUM SECTION

REMOVING THE INK CARTRIDGE SET SWITCH PCB MOUNTING BRACKET

3. Removing the Ink Cartridge Set Switch PCB Mounting Bracket
(1) Pull out the print drum, pull out the ink cartridge, and remove the following components.
• rint drum front cover
• Ink cartridge guide ass'y
• Drum front upper cover
• Ink cartridge set switch PCB cover
• vInk cartridge set switch PCB
(2) Remove the mounting screws (M4 x 6: 3 pcs) [C] on the Ink cartridge set switch PCB mounting
bracket [A], and remove the bracket.
A
A: Ink cartridge set switch PCB mounting bracket
B: Ink cartridge set switch PCB
C: Mounting screws (M4 x 6: 3 pcs)
C
8 – 10
RN (Version 1.0)
B