Master Cutting Mechanism - Riso RN SERIES Technical Manual

3.

Master Cutting Mechanism

• The master is cut by the upper cutter of the Cutter unit being moved up and down by the Cutter motor [A].
• The Cutter motor rotates in a constant direction, and the Cutter home position switch [B] confirms the
position of the upper cutter.
• The Cutter is at the home position when it is not pressing against the Cutter home position switch [B],
and if the switch is depressed briefly after the Cutter motor starts, the motor stops when the switch is no
longer depressed.
A: Cutter motor
B: Cutter home position switch
CHAPTER 13. MASTER MAKING SECTION
Cutter unit home position
B
13 – 5
RN (Version 1.0)
MASTER CUTTING MECHANISM
A