Communications System Overview - Omron NJ-series User Manual

10 Communications Setup

10-1 Communications System Overview

This section gives an overview of the communications systems that are supported by NJ-series Con-
trollers.
The shaded steps in the overall procedure that is shown below are related to the communications sys-
tems.
Step 1. Software Design
Step 2. Software Setups and Programming
Step 3. Mounting and Setting Hardware
Step 4. Wiring
Step 5. Checking Operation and Starting Operation on the
Actual System
Refer to 1-3 Overall Operating Procedure for the NJ-series Controller for details.
10-2
Step 1-1 Designing I/O and Processing
Step 1-2 Designing Tasks
Step 1-3 Designing Programs
Step 2-1 Slave and Unit Configurations
Step 2-2 Controller Setup
Step 2-3 Programming
Step 2-4 Offline Debugging
NJ-series CPU Unit Software User's Manual (W501)