Overview Of Task Designing Procedure - Omron NJ-series User Manual

5 Designing Tasks
5-1 Overview of Task Designing
Procedure
This section provides an overview of the task designing procedure.
The shaded steps in the overall procedure that is shown below are related to the task designing proce-
dure.
Step 1. Software Design
Step 2. Software Setups and Programming
Step 3. Mounting and Setting Hardware
Step 4. Wiring
Step 5. Checking Operation and Starting Operation on the
Actual System
Refer to 1-3 Overall Operating Procedure for the NJ-series Controller for details.
5-2
Step 1-1 I/O Processing Design
Step 1-2 Designing Tasks
Step 1-3 Designing Programs
Step 2-1 Slave and Unit Configurations
Step 2-2 Controller Setup
Step 2-3 Programming
Step 2-4 Offline Debugging
NJ-series CPU Unit Software User's Manual (W501)