Omron NJ-series User Manual page 519

12 Troubleshooting
Event name Backup Completed
Meaning The backup operation ended normally.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The backup operation ended nor-
mally.
Attached Attached information 1: Operation type
information
0101 hex: Controller to SD Memory Card for switch operation on front of CPU Unit
0102 hex: Controller to SD Memory Card for system variable operation
0103 hex: Controller to SD Memory Card for Sysmac Studio operation
0201 hex: Controller to computer
Precautions/ None
Remarks
* This event code was added for unit version 1.03 of the CPU Unit.
Event name Restore Operation Started
Meaning A restore operation started.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A restore operation started.
Attached Attached information 1: Operation type
information
0101 hex: SD Memory Card to Controller for switch operation on front of CPU Unit
0201 hex: Computer to Controller
Precautions/ None
Remarks
* This event code was added for unit version 1.03 of the CPU Unit.
12-48
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
--- Operation
Data type
---
Correction
---
Event code 901B 0000 hex*
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
Event code 901C 0000 hex*
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
NJ-series CPU Unit Software User's Manual (W501)
At end of normal
backup operation
System
At start of restore
operation
System