Checking Operation And Starting Operation On The Actual System - Omron NJ-series User Manual

11-2-6 Checking Operation and Starting Operation on the Actual System

Go online with the Controller, download the project, check the wiring and perform test operation before
you start actual operation.
Going Online
1
Turn ON the power supply to NJ-series Controller.
2
Connect the computer and the CPU Unit with a USB cable.
3
Select Communications Setup from the Controller Menu. Select the connection method for the
connection configuration in the Connection Type Field.
4
Select Online from the Controller Menu.
Downloading the Project with the Synchronize Menu
Select Synchronize from the Controller Menu and download the project to the Controller.
Note Use the Synchronize Menu of the Sysmac Studio to upload and download the project.
Checking Wiring
Check the wiring by performing forced-refreshing with user-specified values from the I/O Map or Ladder
Editor.
MC Test Run
1
Open the MC Test Run Dialog Box.
2
Change the CPU Unit to PROGRAM mode.
3
Monitor input signals on the display to check the wiring.
4
Jog the axis from the display.
NJ-series CPU Unit Software User's Manual (W501)
11 Example of Actual Application Procedures
11
11-9