Omron NJ-series User Manual page 517

12 Troubleshooting
Event name Reset Executed
Meaning A reset was executed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A reset command was received.
Attached None
information
Precautions/ None
Remarks
Event name User Program Execution ID Write
Meaning The user program execution ID was set or changed in the CPU Unit.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A user with Administrator rights
changed the user program execution
ID that is set in the CPU Unit.
Attached None
information
Precautions/ None
Remarks
Event name All Controller Errors Cleared
Meaning All current errors were cleared.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The user cleared all current errors.
Attached None
information
Precautions/ None
Remarks
12-46
Source details
Information Recovery
--- Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Event code 9015 0000 hex
None Detection
timing
--- Log category
Operation is started after a reset is executed.
Name
---
Prevention
---
Event code 9016 0000 hex
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
Event code 9018 0000 hex
None Detection
timing
--- Log category
Clearing all errors for which the causes have been
removed.
Name
---
Prevention
---
NJ-series CPU Unit Software User's Manual (W501)
Commands from
user
Access
When download-
ing
Access
Commands from
user
Access