Download Print this page
Omron NJ Series Quick Start Manual

Omron NJ Series Quick Start Manual

Powerful power supply unit to supply stable power controller
Hide thumbs Also See for NJ Series:

Advertisement

Quick Links

Authorised Distributors:-
Intech Systems Chennai Pvt. Ltd,
Ph: +91 44 4353 8888 Fax: 044 4353 7888
E-mail: info@intechchennai.com Website: www.intechchennai.com
NJ-Series Power Supply Unit
NJ-PA/PD
Powerful power supply unit to supply
stable power to the NJ-series controller.
Stable power supply is available from the NJ-series
CPU Unit to each I/O Unit via the dedicated bus.
Lineups are provided for AC and DC input types with 30 W output.
Features
• AC input type (100 to 240 VAC)/DC input type (24 VDC) with 30 W
• Operating output contact indicates the CPU
Ordering Information
International Standards
• The standards are abbreviated as follows: U: UL, U1: UL(Class I Div
(Class I Division 2 Products for Haza
• Contact your OMRON representative for further det
Power Supply Units
Product Name
AC Power
Supply Unit
DC Power
Supply Unit
Note: Power supply units for the CJ-Series cannot be used as a power suppl
expansion rack.
Accessories
There is no accessory for the NJ-series Power Supply Unit.
Sysmac is a trademark or registered tra
Other company names and product names in this
Chennai-600 032
operation status (available in all models).
rdous Locations), CU: cUL, N: NK,
ails and applicable conditions for these standards.
Output
current
Power
supply
5-VDC
24-VDC
voltage
output
output
capacity
capacity
100 to 240
VAC
6.0 A
1.0 A
24 VDC
demark of OMRON Corporation in Japan and other countries for OMRON factory automation pr
document are the trademarks or registered
output allows power supply to large-scale con gurations.
ision 2 Products for Hazardous Locations), C: CSA, UC: cULus
L: Lloyd, and CE: EC Directives.
Output
Options
capacity
24-VDC
Total power
service
RUN
consumption
power
output
supply
30 W
No
Yes
y for a CPU rack of the NJ system or as a power supply for
trademarks of their respective companie s.
CSM_NJ-PA_PD_DS_E_1_
NJ-PD3001
, UC1: cULus
Model
Standards
Maintenance
forecast
monitor
NJ-PA3001
UC1, N, L,
No
CE
NJ-PD3001
an
oducts.
2
1

Advertisement

loading

Summary of Contents for Omron NJ Series

  • Page 1 There is no accessory for the NJ-series Power Supply Unit. Sysmac is a trademark or registered tra demark of OMRON Corporation in Japan and other countries for OMRON factory automation pr oducts. Other company names and product names in this document are the trademarks or registered trademarks of their respective companie s.
  • Page 2: General Specification

    NJ-PA/PD General Specification Item Specifications Model NJ-PA3001 NJ-PD3001 Supply voltage 100 to 240 VAC (wide-range), 50/60 Hz 24 VDC Operating voltage and 85 to 264 VAC, 47 to 63 Hz 19.2 to 28.8 VDC frequency ranges Power consumption 120 VA max. 60 W max.
  • Page 3: External Interface

    NJ-PA/PD External Interface NJ-PA3001 POWER Indicator (PWR LED) AC input Connector RUN output NJ-PD3001 POWER Indicator (PWR LED) + (DC input) Connector – (DC input) RUN output AC Input Supply 100 to 240 VAC (allowable: 85 to 264 VAC). The NJ-PA3001 has a wide input range, so it does not have voltage switching terminals. DC Input Supply 24 VDC (allowable: 19.2 to 28.8 VDC.) Ground to a resistance of 100 Ω...
  • Page 4: Crimp Terminals

    NJ-PA/PD Wiring About Power Supply For AC/DC power supply Recommended wire AWG 14 to 20 diameter (Cross section 0.517 to 2.08 mm For grounding wire Recommended wire 2 mm or thicker diameter Crimp Terminals The terminals on the Power Supply Unit are M4, self-raising terminals with screws. Crimp Terminals for AC Power Supplies 7 mm max.
  • Page 5 NJ-PA/PD Example: Calculating Total Current and Power Consumption Example: When the Following Units are Mounted to a NJ-Series CPU Rack Using a NJ-PA3001 Power Supply Unit Voltage group Unit type Model Quantity 24 V CPU Unit NJ501-1500 1.90 A I/O Control Unit CJ1W-IC101 0.02 A Basic I/O Units (Input Units)
  • Page 6 NJ-PA/PD Dimensions (Unit: mm) NJ-PA3001 NJ-PD3001 Related Manuals Manual name Cat. No. Model numbers Application Description NJ-series CPU Unit @@@@ Learning the basic An introduction to the entire NJ-series system is Hardware User’s Manual speci cations of the NJ-series provided along with the following information on CPU Units, including a Controller built with an NJ501 CPU Unit.

This manual is also suitable for:

Nj-paNj-pdNj-pd3001