Omron NJ-series User Manual page 89

2 CPU Unit Operation
 Checking the Operating Mode from the Sysmac Studio
You can check the operating mode from the Controller Status Pane of the Sysmac Studio. The fol-
lowing Controller Status Pane indicates that the CPU Unit is in RUN mode.
Additional Information
If you want to output a signal when the CPU Unit is in RUN mode, use the RUN output on the
Power Supply Unit. Refer to the NJ-series CPU Unit Hardware User's Manual (Cat. No. W500)
for details on the RUN output on the Power Supply Unit.
2-30 NJ-series CPU Unit Software User's Manual (W501)