Omron NJ-series User Manual page 654

Security Asset protec-
tion and pre-
venting
incorrect oper-
ation
SD Memory Application
Cards
Backing up SD Memory
data Card backups
Sysmac Studio Controller backups
Note Refer to the manuals for the function modules for additions and changes to function module functions for
each unit version of the CPU Units.
 Addition of Mountable CJ-series Units
The CJ-series Units that can be mounted have increased for the new unit version of the CPU Unit.
For details, refer to NJ-series CPU Unit Hardware User's Manual (Cat. No. W500).
 Additions and Changes to Basic Instructions and Motion Control Instructions
The basic instructions and motion control instructions that you can use have increased or changed
for the new unit version of the CPU Unit. For details, refer to the NJ-series Instructions Reference
Manual (Cat. No. W502) and NJ-series Motion Control Instructions Reference Manual (Cat. No.
W508).
Additions and Changes to Controller Events
The events that can occur have increased or changed for the new unit version of the CPU Unit.
There are also changes in the recovery methods to use when some errors occur.
For details, refer to the NJ-series Troubleshooting Manual (Cat. No. W503).
 Additions and Changes to System-defined Variables
The system-defined variables that you can use have increased or changed for the new unit version
of the CPU Unit. Refer to A-3 System-defined Variables for details.
NJ-series CPU Unit Software User's Manual (W501)
Function
Protection Data protec-
tion
Operation Number of
authority verifi- groups
cation
Automatic transfer from SD
Memory Card
Operating CPU Unit
methods front-panel
DIP switch
Specification
with system-
defined vari-
ables
SD Memory
Card Dialog
Box in Sysmac
Studio
Special
instruction
Protection Disabling
backups to SD
Memory Cards
Sysmac
Addition/ Unit
Studio
change version
version
Addition 1.01 1.02
Change 1.01 1.02
Addition 1.03 1.04
Addition 1.03 1.04
Addition 1.03 1.04
Addition 1.03 1.04
Addition 1.08 1.09
Addition 1.03 1.04
Addition 1.03 1.04
Appendices
Reference
8-4-4 Data Protection
8-4-5 Operation
Authority Verification
9-4 Automatic Trans-
fers from SD Memory
Cards
9-2 SD Memory Card
Backups
9-3 Disabling Back-
ups to SD Memory
Cards
9-5 Sysmac Studio
Controller Backups
A-127