Omron NJ-series User Manual page 515

12 Troubleshooting
Event name Event Log Cleared
Meaning The event log was cleared.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The event log was cleared by the
user.
Attached Attached information 1: Cleared events
information
Precautions/ None
Remarks
Event name Automatic Transfer Completed
Meaning The automatic transfer was completed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The automatic transfer was com-
pleted.
Attached None
information
Precautions/ None
Remarks
* This event code was added for unit version 1.03 of the CPU Unit.
Event name Power Turned ON
Meaning The power supply was turned ON.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The power supply was turned ON.
Attached None
information
Precautions/ None
Remarks
12-44
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
0: All log categories were cleared
1: The system event log was cleared.
2: The access event log was cleared.
100: The user-defined event log was cleared.
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
---- Operation
Data type
---
Correction
---
Event code 900C 0000 hex
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
Event code 900F 0000 hex*
None Detection
timing
--- Log category
Operation starts according to the Controller Configura-
tions and Setup data that was automatically transferred.
Name
---
Prevention
---
Event code 9011 0000 hex
None Detection
timing
--- Log category
Operation starts.
Name
---
Prevention
---
NJ-series CPU Unit Software User's Manual (W501)
Commands from
user
Access
At power ON
System
At power ON
System