Camera Output Formats; 1X2-1Y - IAI GO-2400M-PMCL User Manual

Camera Output Formats

The GO-2400-PMCL supports a variety of output formats.
The following tap geometries are supported.
The settings on the frame grabber board must be configured to match the tap geometry setting on the
camera. For details configuring frame grabber board settings, refer to the operating instructions for
each board.
Tap Geometry

1X2-1Y

1X3-1Y
1X3-1Y
1X4-1Y
1X8-1Y
1X8-1Y
■ 1X2-1Y
1X2-1Y is a 2-tap output format as defined in GenICam tap geometry.
CL Configuration
Base bit: 8/10
Base bit: 8
Medium bit: 10
Medium bit: 8/10
Full bit: 8
80-bit bit: 10
̶ 29 ̶
GO-2400M-PMCL / GO-2400C-PMCL
IP Bypass Off
bit: 8/10/12
bit: 8
bit: 10/12
bit: 8/10/12
bit: 8
bit: 10
IP Bypass On