IAI GO-2400M-PMCL User Manual page 91

PirisAutoStepMax R/W
PirisPositionLimit R/W
AlcStatus R/O
VideoProcessBypass R/W
Framerate min limit R/O
Exposure min limit R/O
Exposure max limit R/O
PirisPhaseControl R/W
PLSA Min to Max
PLSL Min to Max
ALCST 0=Off
1=AIC(P-Iris Model
only)
2=ASC
3=AGC
VPB 0: Off / 1: On
ARMIN Min to Max *
2
PEMIN Min to Max *
3
PEMAX Min to Max *
3
PIPC 0: A-AM B-BM
1: B-BM A-AM
0 200 60
0 200 74
0 3 0
0 1 0
6029 32764 6080
15 79 20
5976 8000000 8236
0 1 0
̶ 91 ̶
GO-2400M-PMCL / GO-2400C-PMCL
PLSA=[Param.]<CR><LF> Set the maximum
PLSA?<CR><LF> value for the
(GO-2400-AUX1(P-Iris) only) control range as a
step number
when controlling
the P-Iris lens
using auto iris.
(This is only
enabled when
[P-IRIS Lens
Select] is set to
[OTHERS].)
PLSL=[Param.]<CR><LF> Set the maximum
PLSL?<CR><LF> step number for
(GO-2400-AUX1(P-Iris) only) when [P-IRIS Lens
Select] is set to
[OTHERS].
(This is only
enabled when
[P-IRIS Lens
Select] is set to
[OTHERS].)
ALCST?<CR><LF> Display whether
ASC or AGC is
currently being
used for control
when using ALC.
VPB=[Param.]<CR><LF> Enable/ disable
VPB?<CR><LF> video process
bypass mode.
ARMIN?<CR><LF> Display the fastest
value for the
frame rate under
the current
configurations as
a frame interval
[us].
PEMIN?<CR><LF> Display the
minimum value [us]
for exposure time
under the current
configurations.
PEMAX?<CR><LF> Display the
maximum value
[us] for exposure
time under the
current
configurations.
PIPC=[Param.]<CR><LF> Set the iris control
PIPC?<CR><LF> direction for the
(GO-2400-AUX1(P-Iris) only) P-Iris lens.
(This is only
enabled when
[P-IRIS Lens
Select] is set to
[OTHERS].)