Features - IAI GO-2400M-PMCL User Manual

Features

The GO-2400M-PMCL/GO-2400C-PMCL is an industrial progressive scan camera equipped with a
1/1.2-inch global shutter CMOS image sensor with 2.35 effective megapixels (1936 × 1216). The unit is
compact and lightweight in design and is equipped with Camera Link Ver. 2.0 compatible interface.
™ The GO-2400M-PMCL produces monochrome output while the GO-2400C-PMCL produces color output.
Compact and lightweight
The unit's compact (approx. 29 × 29 × 41.5 mm (excluding the lens)) and lightweight (approx. 46 g)
design allows for easy assembly and installation.
Camera Link Ver. 2.0 compatible interface
• High-speed transfer at up to 850 MByte/s of uncompressed data, the ideal format for image
processing.
• Maximum cable length of 10 m.
• Support for PoCL (Power over Camera Link) allowing you to supply power to the camera via the
Camera Link cable.
Note
To power the camera via Camera Link, the frame grabber board you are using must support PoCL. You can also
supply power via the 4-pin connector. A separate power supply and/or conversion cable (not supplied) is required.
Output formats
You can choose from 8-bit, 10-bit, and 12-bit for both monochrome and color outputs.
* As the color camera cannot perform white balance when using 12-bit output, perform white balance on the
application.
High frame rate
Both the GO-2400M-PMCL and GO-2400C-PMCL are capable of frame rates of up to 165.5 fps (for the
8-bit format) and 2.35 megapixel outputs. Even faster frame rates can be achieved by using binning
(GO-2400M-PMCL only) or by specifying smaller scanning areas for the ROI (region of interest).
ALC (automatic lighting control) function
Combine the automatic gain control and automatic exposure control functions to allow handling of
changes in various brightnesses.
Variety of pre-process functions
• LUT (Lookup Table)
Programmable control over gamma and contrast is possible.
• Gamma correction
Gamma can be set to 0.45, 0.60, or 1.0 (off).
• Shading correction (flat field and color shading)
Non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment can
be corrected.
• Bayer white balance (GO-2400C-PMCL only)
Automatically adjust white balance continuously. It can also be adjusted manually using R, and B
gain.
̶ 7 ̶
GO-2400M-PMCL / GO-2400C-PMCL