Step 3: Verifying The Camera's Network Connection Status; Step 4: Configuring Initial Settings For The Camera; Connecting To The Camera To Control Tool - IAI GO-2400M-USB User Manual

Step 3: Verifying the Camera's Network Connection Status

When power is supplied to the camera while the necessary equipment is connected, the power /
trigger LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the power / trigger LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED.
During normal status
™ For details on how to read the LEDs, see "LED status and camera status" (page 8) in the "Parts
Identification" section.

Step 4: Configuring Initial Settings for the Camera

Start Control Tool, configure initial settings for the output format, exposure, external trigger, etc.

Connecting to the Camera to Control Tool

1
Start JAI Control Tool.
Cameras connected to the computer's USB 3.0 connectors are detected, and a window appears.
If they do not appear, right-click inside the window and select [Search for Cameras].
2
Select the camera you want to configure.
3
Check that the settings of the selected camera are displayed.
Lit green
— 14 —
GO-2400M-USB / GO-2400C-USB