0: Off; Min To Max - IAI GO-2400M-PMCL User Manual

LUTMode R/W
AlcSpeed R/W
AwbSpeed R/W
ExposureAutoMax R/W
ExposureAutoMin R/W
AlcReference R/W
GainAutoMax R/W
GainAutoMin R/W
ALCChannelAreaAll R/W
ALCChannelArea R/W
LowRight
ALCChannelArea R/W
LowMidRight
ALCChannelArea R/W
LowMidLeft
ALCChannelArea R/W
LowLeft
ALCChannelArea R/W
MidLowRight
ALCChannelArea R/W
MidLowMidRight
LUTC

0: Off

1: Gamma
2: LUT
ALCS

Min to Max

AWBS Min to Max
ASCEA Min to Max[us]
ASCEI Min to Max
AGCF Min to Max[%]
AGCGA Min to Max
AGCGI Min to Max
ALCA 0: Off / 1: On
ALCLR 0: Off / 1: On
ALCLMR 0: Off / 1: On
ALCLML 0: Off / 1: On
ALCLL 0: Off / 1: On
ALCMLR 0: Off / 1: On
ALCMLMR 0: Off / 1: On
0 2 0
1 8 4
1 8 4
101 8000000 18000
100 7999999 100
1 100 50
101 1600 1600
100 1599 100
0 1 0
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
̶ 85 ̶
GO-2400M-PMCL / GO-2400C-PMCL
LUTC=[Param.]<CR><LF> Select the JAI LUT
LUTC?<CR><LF> mode.
ALCS=[Param.]<CR><LF> Set the control
ALCS?<CR><LF> speed for AGC and
for AGC and ASC ASC (8 is the
fastest).
AWBS=[Param.]<CR><LF> Set the control
AWBS?<CR><LF> speed for Balance
for AWB White Auto (AWB)
(8 is the fastest).
ASCEA=[Param.]<CR><LF> Set the maximum
ASCEA?<CR><LF> value for the
Maximum value is varied Exposure Auto
depending on frame rate. (ASC) control
range.
ASCEI=[Param.]<CR><LF> Set the minimum
ASCEI?<CR><LF> value for the
Maximum value is varied Exposure Auto
depending on frame rate. (ASC) control
range.
AGCF=[Param.]<CR><LF> Set the target
AGCF?<CR><LF> level for ALC.
(unit: %)
AGCGA=[Param.]<CR><LF> Set the maximum
AGCGA?<CR><LF> value for the Gain
Auto (AGC)
control range.
AGCGI=[Param.]<CR><LF> Set the minimum
AGCGI?<CR><LF> value for the Gain
Auto (AGC)
control range.
ALCA=[Param.]<CR><LF> On: Specify all
ALCA?<CR><LF> photometry areas
for ALC,
regardless of the
enabled/disabled
statuses
configured
individually for
each photometry
area with [ALC
Area Selector].
Off: Specify areas
for ALC based on
the enabled/
disabled statuses
configured
individually for
each photometry
area with [ALC
Area Selector].
ALC**=[Param.]<CR><LF> Enable/disable
ALC**?<CR><LF> the Low Right
photometry area.
Enable/disable the
Low Mid Right
photometry area.
Enable/disable the
Low Mid Left
photometry area.
Enable/disable
the Low Left
photometry area.
Enable/disable the
Mid Low Left
photometry area.
Enable/disable
the Mid Low Mid
Right photometry
area.