Introduction; Software Installation; Before Installing The Camera Control Software; Installing The Software - IAI AG-7000 User Manual

1. AG-7000 Camera Control Software

1 Introduction

The AG-7000 is an auto-gated, image intensified CCD camera. This software opens the RS-232 serial
port (COM). This document addresses the JAI AG-7000 camera software available for download at
www.jai.com.

1.1 Software Installation

Following are instructions to install the AG-7000 Camera Software on a PC.
1.1.1
Before installing the Camera Control Software, please note the following.

The AG-7000 camera control software is tested for Microsoft Windows 2000 and XP operating
systems.

We recommend that you use small fonts for the Display Properties dialog box in the control
panel.

The AG-7000 camera control software requires one free communication port that is not in
conflict with other peripherals such as the mouse or modem.
1.1.2
To install the AG-7000 camera control software, follow the steps below.
1. Download the AG-7000 software from the JAI, Inc. web site at www.jai.com.
2. Locate the software by going to the camera description (AG-7000) and clicking on the Software
link, or searching using the site search feature.
3. Click on the "Save" button to save a compressed copy of the software to the hard drive of your
system.
Note: If you go to software and download based on the camera description, for example, AG-7000,
the software download is the correct, and latest released version.

Before Installing the Camera Control Software

Installing the Software

Software Introduction 1