IAI GO-2400M-PMCL User Manual page 56

8
Set the P-IRIS Lens Control setting to [On].
The iris position of the P-Iris lens is initialized.
• Manual operation: Proceed to step 9, and adjust the aperture of the iris.
• Auto operation: Proceed to step 10, and start auto operation.
9
When operating the P-Iris manually, adjust the P-Iris position to obtain the appropriate
brightness.
10
When operating the P-Iris automatically, set the Auto Iris Lens Control Signal Output to [On],
and adjust the brightness with the ALC Reference setting.
̶ 56 ̶
GO-2400M-PMCL / GO-2400C-PMCL