IAI GO-2400M-PMCL User Manual page 46

[Reset Sequence Index] causes the index selector to be reset to Index 1. Thus, the sequence pattern
will start over at the next trigger.
In Trigger Sequence mode, patterns always begin with Index1. Subsequent triggers follow the user-
defined values in [Sequence Index Frame Count] and [Sequence ROI Next Index].
Assigning a Next Index value of "1" to an index creates a loop back to the start of the sequence
pattern.
Trigger Sequence example
User-defined Indexes (up to 128)
Index1
ROI
Exposure
Gain
LUT
Binning
Frame Count = 2
Next Index = 3
Triggers /
1
Image
Frames
Index structure for Trigger Sequence
Index
Selector
(MUX)
Current
Index
Reset
Sequence
Index Table
・ Index Next Index
Command Sequence mode
This mode allows the user to vary the "pattern" of the sequence in response to external factors.
Changes in the sequence can be initiated manually or in a programmatic fashion as the result of data
from sensors/controllers or from the analysis of previous images.
In this mode, the user can define up to 128 different "indexes" each incorporating a combination of:
• ROI (width, height, offset X, and offset Y)
• Exposure Time
• Gain Level (R/B Gain can also be configured on the color model)
• Black Level
• Binning Mode (monochrome only)
• LUT Enable (whether or not to enable the use of LUT for this index)
The user must also enter a value from 1 to 128 in [Command Sequence Index]. This indicates which
index to execute each time a trigger is received. The same index will continue to be executed for all
subsequent triggers as long as the value of [Command Sequence Index] remains unchanged.
Index2
ROI
Exposure
Gain
LUT
Binning
Frame Count = 1
Next Index = 1
2
6
Exposure
Index1
ROI1
1
Exposure
Index2
ROI2
2
Exposure
Index128
ROI128
128
Command
・ Reset Sequence Index
̶ 46 ̶
Index3
ROI
ROI
Exposure
Exposure
Gain
Gain
LUT
LUT
Binning
Binning
Frame Count = 1
Frame Count = 2
Next Index = 4
Next Index = 2
3 4
Black
Gain1 Binning1
Level1
(M/Red/Blue) (H/V)
Black
Binning2
Gain2
Level2
(M/Red/Blue) (H/V)
Black
Binning128
Gain128
Level128 Enable128
(H/V)
(M/Red/Blue)
Common Settings
・ Sequence LUT mode
GO-2400M-PMCL / GO-2400C-PMCL
Index4
5
LUT Frame Next
Enable1 Count1 Index1
LUT
Frame Next
Enable2 Count2 Index2
LUT Frame Next
Count128 Index128