Control without external triggers
When controlling the exposure time using specified exposure times
Configure the settings as follows.
Trigger Selector (trigger operation)
Trigger Mode
Exposure Mode
Exposure Time
Exposure Auto
* 1 Max. value = [Acquisition Frame Rate] - Max. exposure time value A ("Exposure times" (page 19))
1
Set [Exposure Mode] to [Timed].
([Timed] is the default setting.)
2
Specify the exposure time in [Exposure Time].
The setting value for the exposure time can only be changed when [Exposure Auto] is set to [Off].
If [Exposure Auto] is set to [Continuous], temporarily set it to [Off] before changing the [Exposure
Time].
3
Set [Trigger Mode] to [On].
4
If necessary, change the [Exposure Auto] setting.
When not controlling the exposure time
Configure the settings as follows.
Exposure Mode
The exposure will be performed with an exposure time equal to 1 / frame rate.
* The [Exposure Time] setting will be disabled, and the [Exposure Auto] function cannot be used.
Item
Item
̶ 21 ̶
Setting value / selectable range
Frame Start
Off
Timed (control via exposure time)
Varies depending on the Tap Geometry and CL Pixel Clock
settings. *
1
Off, Continuous
Setting value / selectable range
Off
GO-2400M-PMCL / GO-2400C-PMCL