20 mp cmos digital progressive scan
monochrome and color camera spark series (105 pages)
Summary of Contents for IAI GO-2400M-PMCL
Page 1
User Manual GO-2400M-PMCL GO-2400C-PMCL 2.35M Digital Progressive Scan Monochrome and Color Camera Document Version: 1.1 GO-2400-PMCL_Ver.1.1_Apr.2016 Thank you for purchasing this product. Be sure to read this manual before use. This manual includes important safety precautions and instructions on how to operate the unit. Be sure to read this manual to ensure proper operation, and store it safely for future use.
GO-2400M-PMCL / GO-2400C-PMCL Contents During normal continuous operation ....37 Notice ................3 Warranty ...............3 Gain Control ..............39 Certifications ..............3 LUT (Lookup Table) ............40 To use the LUT function ........40 Warning ................3 LUT values ............41 Usage Precautions ............6 Features ................7 Gamma Function ............41 To use the gamma function ........41...
GO-2400M-PMCL / GO-2400C-PMCL Notice The material contained in this manual consists of information that is proprietary to JAI Ltd., Japan and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the use of its product and assumes no responsibility for any errors which may appear or for damages resulting from the use of the information contained herein.
Page 4
GO-2400M-PMCL / GO-2400C-PMCL Supplement The following statement is related to the regulation on “ Measures for the Administration of the control of Pollution by Electronic Information Products “ , known as “ China RoHS “. The table shows contained Hazardous Substances in this camera.
Page 5
GO-2400M-PMCL / GO-2400C-PMCL Supplement The following statement is related to the regulation on “ Measures for the Administration of the control of Pollution by Electronic Information Products “ , known as “ China RoHS “. The table shows contained Hazardous Substances in this camera.
GO-2400M-PMCL / GO-2400C-PMCL Usage Precautions Notes on cable configurations The presence of lighting equipment and television receivers nearby may result in video and audio noise. In such cases, change the cable configurations or placement. Notes on Camera Link cable connections Secure the locking screws on the connector manually, and do not use a driver.
High frame rate Both the GO-2400M-PMCL and GO-2400C-PMCL are capable of frame rates of up to 165.5 fps (for the 8-bit format) and 2.35 megapixel outputs. Even faster frame rates can be achieved by using binning (GO-2400M-PMCL only) or by specifying smaller scanning areas for the ROI (region of interest).
GO-2400M-PMCL / GO-2400C-PMCL Connection example: AC adapter External trigger Frame grabber board Camera Computer Parts Identification ② ③ ① ④ ⑤ 1 Lens mount (C-mount) Mount a C-mount lens, microscope adapter, etc. here. Before mounting a lens, be sure to refer to “Step 2: Connecting Devices” (page 13) and confirm the ...
Page 9
GO-2400M-PMCL / GO-2400C-PMCL 2 Mini Camera Link connector Connect a cable that is compatible with Mini Camera Link (SDR) connectors here. Camera side: HONDA HDR-EC26FYTG2-SL+ Port 1 Pin No. Input/output Signal Description 1, 26 Power Power 2(–), 15(+) X_OUT0 Data out 3(–), 16(+)
Page 10
GO-2400M-PMCL / GO-2400C-PMCL 3 Power/trigger LED Indicates the power and trigger input status. LED status and camera status Light Status Power / trigger LED Camera initializing. Lit amber Operational and no triggers being input. Lit green Operational and triggers being input.
GO-2400M-PMCL / GO-2400C-PMCL Preparation Preparation Flow Step 1 Installing the Software (first time only) Install the software for configuring and controlling the camera (JAI SDK) on the computer. Step 2 Connecting Devices Connect the lens, Camera Link cable, AC adapter, computer, and other devices.
Page 12
GO-2400M-PMCL / GO-2400C-PMCL v Clear the [JAI GigE Vision Filter Driver] checkbox, and save. Verify the settings for using Camera Link. The GO-2400-PMCL supports GenICam and Gen-CP. Check the following settings when controlling the camera via JAI SDK. Checking the frame grabber board's settings Settings must be configured on the frame grabber board to enable Gen-CP support.
GO-2400M-PMCL / GO-2400C-PMCL Step 2: Connecting Devices Connect the lens, Camera Link cable, AC adapter, and other necessary devices. Attach the lens in a clean environment to prevent dust from adhering to the unit. 4 Frame grabber board 3 Camera Link cable...
Page 14
GO-2400M-PMCL / GO-2400C-PMCL 1 Lens • C-mount lenses with lens mount protrusions of 9 mm or less can be attached. 9 mm or less Lens mount protrusion Lens • The diagonal of the camera's CMOS image sensor is smaller at 13.4 mm than the 16 mm of 1-inch models.
GO-2400M-PMCL / GO-2400C-PMCL 5 Computer Use a computer that meets the following requirements. Operating system (OS): Microsoft Windows Vista 7/8 32-bit/64-bit edition CPU: Intel Core i3 or higher Memory: Windows 7/8 32-bit edition: DDR3, 4 GB or higher Windows 7/8 64-bit edition: DDR3, 8 GB or higher Graphics card: PCI-Express 3.0 or higher...
GO-2400M-PMCL / GO-2400C-PMCL Step 4: Configuring Initial Settings for the Camera Start Control Tool, connect the camera to the frame grabber board, and configure initial settings for the output format, exposure, external trigger, etc. Connecting to the Camera to Control Tool Start JAI Control Tool.
Page 17
GO-2400M-PMCL / GO-2400C-PMCL Select the [Feature Properties] tab, and select the item you want to configure under [Image Format Control]. when a configurable item is selected. Note Settings can only be changed when image capture on the camera is stopped. If an item is grayed out and does not appear even when you select it, click (Stop Acquisition) to stop image capture.
GO-2400M-PMCL / GO-2400C-PMCL Configuring Exposure and External Trigger Settings Configure settings related to exposure control methods and trigger control. The factory default settings are as follows. Change settings as necessary, according to the intended purpose or application. Factory default values...
GO-2400M-PMCL / GO-2400C-PMCL ■ Exposure times Exposure times vary depending on the Tap Geometry and CL Pixel Clock settings. Refer to the following table. Longest Shortest Tap Geometry CL Pixel Clock (MHz) Max. exposure time value A exposure time exposure time...
GO-2400M-PMCL / GO-2400C-PMCL If necessary, change the [Trigger Source], [Trigger Activation], and [Exposure Auto] settings. When controlling the exposure time using the pulse width of the trigger input signal Configure the settings as follows. Item Setting value / selectable range...
GO-2400M-PMCL / GO-2400C-PMCL Control without external triggers When controlling the exposure time using specified exposure times Configure the settings as follows. Item Setting value / selectable range Trigger Selector (trigger operation) Frame Start Trigger Mode Exposure Mode Timed (control via exposure time)
Expand [Analog Control], and select the gain you want to configure in [Gain Selector]. • For the GO-2400M-PMCL, only [Analog All] (master gain) can be configured. • For the GO-2400C-PMCL, [Analog All] (master gain), [Digital Red] (digital R gain), and [Digital Blue] (digital B gain) can be configured individually.
Expand [Analog Control] and select the black level you want to configure in [Black Level Selector]. For the GO-2400M-PMCL, only [Digital All] (master black) can be configured. For the GO-2400C-PMCL, [Digital All] (master black), [Digital Red] (digital R), and [Digital Blue] (digital B) can be configured individually.
GO-2400M-PMCL / GO-2400C-PMCL Step 7: Saving the Settings The setting values configured in Control Tool will be deleted when the camera is turned off. By storing current setting values to user memory, you can load and recall them whenever necessary. You can save up to three sets of user memory settings (User Set1 to 3).
GO-2400M-PMCL / GO-2400C-PMCL Select [User Set Save], and click [Execute 'User Set Save' Command]. The current setting values are saved as user settings. ■ To load user settings Stop image capture. User settings can only be loaded when image capture on the camera is stopped.
GO-2400M-PMCL / GO-2400C-PMCL Basic Function Matrix The combinations of settings for the basic functions that can be used together are as follows. Video Send Mode × × × × Timed × ...
GO-2400M-PMCL / GO-2400C-PMCL Main Functions GPIO (Digital Input/Output Settings) The unit can input/output the following signals to and from external input/output connectors. External output TTL Out (Line1) DC IN / trigger IN connector (4-pin round) External input TTL IN (Line4)
GO-2400M-PMCL / GO-2400C-PMCL Valid Input/Output Combinations The following signals can be used as sources for each output destination (Trigger Selector, Line Selector, Pulse Generator Selector). You can also connect two different sources to NAND paths in the GPIO and reuse the signal generated there as a source for a different selector.
GO-2400M-PMCL / GO-2400C-PMCL Camera Output Formats The GO-2400-PMCL supports a variety of output formats. The following tap geometries are supported. The settings on the frame grabber board must be configured to match the tap geometry setting on the camera. For details configuring frame grabber board settings, refer to the operating instructions for each board.
GO-2400M-PMCL / GO-2400C-PMCL ■ 1X3-1Y 1X3-1Y is a 3-tap output format as defined in GenICam tap geometry. ■ 1X4-1Y 1X4-1Y is a 4-tap output format as defined in GenICam tap geometry. ̶ 30 ̶...
GO-2400M-PMCL / GO-2400C-PMCL ■ 1X8-1Y (CL) 1X8-1Y (CL) is a 8-tap output format as defined in GenICam tap geometry. ■ Cable length reference The following is a reference for the length of cable you can use based on the Camera Link clock*...
GO-2400M-PMCL / GO-2400C-PMCL Trigger Control The camera allows Frame Start trigger controls to be performed via external trigger signals. The Frame Start trigger allows exposure control via the trigger signal inputs. The settings for exposure control and triggers are related to each other. Be sure to configure the settings described in “Configuring Exposure and External Trigger Settings”...
GO-2400M-PMCL / GO-2400C-PMCL Period From Period from Period FVAL CL Pixel Trigger start Exposure end to next Max Exposure Min Exposure Clock edge to Geometry endTo FVAL trigger start [msec] [usec] (MHz) Exposure start start [B] (usec) [C] (usec) [A] (usec)
GO-2400M-PMCL / GO-2400C-PMCL Next trigger input Next trigger disabled enabled Trigger Sensor Exposure Data output duration (= Height x Line Period) Exposure Active Exposure duration FVAL 0.25 us 0.25 us Frame Active Frame Trigger Wait Period From Period From Period from...
Page 38
GO-2400M-PMCL / GO-2400C-PMCL When [Exposure Mode] is [Off] FVAL Sensor Exposure Exposure duration Exposure Active Period From FVAL end to Exposure stop period [X1] Tap Geometry CL Pixel Clock (MHz) Exposure end [min] [X2] (usec) (usec) Horizontal ROI 13/H Freq ...
GO-2400M-PMCL / GO-2400C-PMCL Period From CL Pixel Clock FVAL end to Min Exposure Tap Geometry Max Exposure [msec] (MHz) Exposure end [usec] [X1] (usec) Horizontal ROI Framerate-13/H Freq 3H + 22 x 0.013 1X2-1Y 37.125 143 to 169 7999.658 (Full) 74.25...
LUT Selector R, G, B Select the LUT channel to control. LUT Index GO-2400M-PMCL: 0 to 255 Select the LUT index to configure. Indexes represent the GO-2400C-PMCL: 0 to 255 setting points, and values from the lowest point (Index 0) to the highest point (Index 15) are represented.
GO-2400M-PMCL / GO-2400C-PMCL ■ LUT values LUT values range from 0 at the lowest to 4095 at the highest. Linear interpolation is used to calculate LUT values between the index points. 4095 Interpolation using the average values of data to the left LUT Value [1] and right is used to determine values between points.
GO-2400M-PMCL / GO-2400C-PMCL Shading Correction The shading correction is a function that corrects non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment. Using this function allows correction even if top, bottom, left, and right shading is not symmetrical in relation to the center of the screen (H, V).
GO-2400M-PMCL / GO-2400C-PMCL ■ Color Shading (GO-2400C-PMCL only) R-channel and B-channel properties are adjusted to using the G-channel shading properties as a reference. Post-correction Pre-correction Caution Proper correction is not possible under the following conditions. • If an area with a brightness level that is more than 30% less than the reference level exists within the screen •...
GO-2400M-PMCL / GO-2400C-PMCL ROI (Regional Scanning Function) The ROI (region of interest) function allows you to output images by specifying the areas to scan. ROI Settings Specify the area to scan by specifying width, height, and horizontal/vertical offset values under [Image Format Control].
GO-2400M-PMCL / GO-2400C-PMCL Video Send Mode Switch the video send mode to configure and operate Sequence Trigger and other JAI Custom Control functions. Video Send Mode ■ To switch the video send mode Select the video send mode in [Video Send Mode Selector].
Page 46
GO-2400M-PMCL / GO-2400C-PMCL [Reset Sequence Index] causes the index selector to be reset to Index 1. Thus, the sequence pattern will start over at the next trigger. In Trigger Sequence mode, patterns always begin with Index1. Subsequent triggers follow the user- defined values in [Sequence Index Frame Count] and [Sequence ROI Next Index].
Page 47
GO-2400M-PMCL / GO-2400C-PMCL Changing the value of [Command Sequence Index] to one of the other predefined indexes causes that index to be executed in response to subsequent triggers. This mode of operation enables users to develop applications that continually send new values to [Command Sequence Index] in response to external factors such as changing light conditions, different types or sizes of objects being inspected, or other factors.
GO-2400M-PMCL / GO-2400C-PMCL Index structure for Command Sequence Index Selector Black Gain1 Binning1 ROI1 Index1 Exposure1 (MUX) (H/V) Enable1 (M/Red/Blue) Level1 Binning2 Gain2 Black Index2 ROI2 Exposure2 (H/V) (M/Red/Blue) Level2 Enable2 Current Index Exposure Gain128 Black Binning128 Index128 ROI128 (M/Red/Blue)
Page 49
GO-2400M-PMCL / GO-2400C-PMCL Configuration Configure each area so that they do not overlap. Both the horizontal and vertical settings must be configured as even values. Horizontal ROI conditions ROI Offset H1 + ROI Width 1 < ROI Offset H2 ROI Offset H2 + ROI Width 2 < ROI Offset H3 ROI Offset H3 + ROI Width 3 <...
Page 50
GO-2400M-PMCL / GO-2400C-PMCL Index 1 Index 2 Index 3 Index 4 Enabled Enabled area Hori Vert Hori Vert Hori Vert Hori Vert True True True True True True True True ROI 1-1, ROI 1-2, ROI 1-3, ROI 1-4 ROI 2-1, ROI 2-2, ROI 2-3, ROI 2-4...
GO-2400M-PMCL / GO-2400C-PMCL ALC (Automatic Level Control) Function The ALC (automatic level control) function combines the automatic gain control (AGC/Auto Gain Control) and automatic exposure control (ASC/Auto Shutter Control) functions, and is capable of handling various changes in brightness. Change from bright to dark: ASC AGC Change from dark to bright: AGC ...
GO-2400M-PMCL / GO-2400C-PMCL Auto gain metering areas (16 areas) High High High High Mid-left Mid-right Right Left Mid-High Mid-High Mid-High Mid-High Left Mid-left Mid-right Right Mid-Low Mid-Low Mid-Low Mid-Low Mid-left Mid-right Right Left Mid-left Mid-right Right Left Counter and Timer Control Function (only “Counter” is...
GO-2400M-PMCL / GO-2400C-PMCL ■ To use the counter function Configure the settings as follows. Three counters can be configured (Counter 0 to 2). Item Setting value / selectable range Description Counter 0 to 2 Counter 0 to 2 Select the counter.
In addition to the standard model, a model that supports P-Iris lens control is available. Currently, only a monochrome model, the GO-2400M-PMCL-AUX1, is available. The DC IN / trigger connector (4-pin round) signal on this model differs from that of the standard model.
GO-2400M-PMCL / GO-2400C-PMCL ■ Supported lenses The GO-2400-PMCL-AUX1 supports the following lenses. LM16JC5MM Kowa 16 mm 2/3" LM35JC5MM Kowa 35 mm 2/3" CINEGON 1.9/10 Schneider 16 mm 1" CINEGON 1.8/4.8 Schneider 11 mm 2/3" SCHNEIDER COMPACTIRIS Schneider P-IRIS unit MG3518KC...
Page 56
GO-2400M-PMCL / GO-2400C-PMCL Set the P-IRIS Lens Control setting to [On]. The iris position of the P-Iris lens is initialized. • Manual operation: Proceed to step 9, and adjust the aperture of the iris. • Auto operation: Proceed to step 10, and start auto operation.
GO-2400M-PMCL / GO-2400C-PMCL Settings List Feature Properties : Settings that can only be configured when image capture on the camera is stopped. Access Function name Setting range Min. value Max. value Default value Description type — — — Display/configure a) Device Control information related to the device.
Page 58
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type Offset X Min to Max 1840 Set the horizontal offset. Offset Y Min to Max 1214 Set the vertical offset. Binning 1: Off 1: Off...
Page 59
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — Trigger OverLap Select the trigger overlap operation. Trigger Option — — Select the alternate trigger modes when [Exposure Mode] is set to [Timed].
Page 60
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — User Output True, False FALSE Set the User Output Value value selected in [User Output Selector]. Configure analog e) Analog Control control settings.
Page 61
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type 70.810386 74250000 Pulse Generator 70.810386 to 74250000 4.8E+07 Set the maximum Frequency (Hz) count up value using frequency. This value is calculated based on the Pulse Generator Length value.
Page 62
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type Pulse Generator Low [Low] — — 0: Low Select the count clear Clear Source High [High] input signal source. FrameTriggerWait [Frame Trigger Line4 TTL In is...
Page 63
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — Binning Gain Set whether to apply Enable gain to the image during binning mode. GO-2400M-PMCL only Blemish True, False — — TRUE...
Page 64
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — ALC Area LowRight [Low Right] Low Right Select the area for Selector LowMidRight [Low Mid-Right] which to configure LowMidLeft [Low Mid-Left] [ALC Area Enable].
Page 65
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — AWB Area LowRight [Low Right] Low Right Select the area for Selector LowMidRight [Low Mid-Right] which to configure LowMidLeft [Low Mid-Left] [AWB Area Enable].
Page 66
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type 1840 Sequence Roi 0 to 1840 Set the Offset X of the Offset X selected Sequence Roi Index. Sequence Roi 0 to 1214 1214...
Page 67
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type 1840 Sensor Multi Roi 0 to 1840 Set the Offset X of the Offset X selected Sensor Multi Roi Index. Sensor Multi Roi 0 to 1214...
Page 68
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — P-IRIS Current F F_OPEN [Open] Unknown Display the iris Value F_14 [F 1.4] position of the P-Iris F_20 [F 2.0] lens as an F number.
GO-2400M-PMCL / GO-2400C-PMCL Access Function name Setting range Min. value Max. value Default value Description type — — Counter0 Refresh — — Update the count value. Counter0 Value — — — Display the count value. Counter0 Status CounterActive [Counter Active] —...
Page 70
GO-2400M-PMCL / GO-2400C-PMCL DeviceUserID User can save and UD=[Param.]<CR><LF> Set the user ID for load free text. UD?<CR><LF> the camera. (12 or less characters) 2. Technology Specific Bootstrap Register SupportedBaudrates SBDRT Indicate Support/ 0x01 0xFF 0x1F SBDRT?<CR><LF> Display the Non-support status...
Page 71
GO-2400M-PMCL / GO-2400C-PMCL PixelFormat R/(W) Mono model: BA=[Param.]<CR><LF> Set the pixel 0: Mono8 BA?<CR><LF> format. 1: Mono10 2: Mono12* Color model: 0: ColorRG8 1: ColorRG10 2: ColorRG12* (*VP bypass On only) TestImageSelector 0: Off Mono:3 TPN=[Param.]<CR><LF> Select the test 1: GreyHorizontalRamp Color:6 TPN?<CR><LF>...
Page 72
GO-2400M-PMCL / GO-2400C-PMCL LineInverter_Nand1In2 ND1INV2 False/True ND1INV2=[Param.]<CR><LF> Enable/disable ND0INV2?<CR><LF> polarity inversion for the NAND1 In2 input. LineSource_Line1 0: Low LS0=[Param.]<CR><LF> Select the line 1: High LS0?<CR><LF> source signal for 3: FrameTriggerWait For 12pin TTL out Line1 (12-pin TTL 4: FrameActive output).
Page 73
GO-2400M-PMCL / GO-2400C-PMCL 9. Transport Layer Control DeviceTapGeometry TAGM 1: Geometry_1X2_1Y TAGM=[Param.]<CR><LF> Set the 3: Geometry_1X4_1Y TAGM?<CR><LF> transmission 5: Geometry_1X8_1Y method for each 7: Geometry_1X3_1Y time images are transmitted from the device (TAP structure). 10. User Set Control UserSetLoad (R)/W 0: Default LD=[Param.]<CR><LF>...
Page 74
GO-2400M-PMCL / GO-2400C-PMCL BlemishWhiteDetect BMPXW Param 1: Blemish –1 BMPXW=[Param1],[Param2]<CR><LF> Display the x PositionX index –1 1935 BMPXW? [Param1]<CR><LF> coordinate Param 2: X (horizontal pixel position(Min to position) of the Max) correction blemish selected in [Blemish Data Index]. You can also...
GO-2400M-PMCL / GO-2400C-PMCL SequenceModeFrame SQF4 Min to Max SQF4=[Param.]<CR><LF> Set the frame Count4 SQI4?<CR><LF> count of Sequence Roi Index4. (Only enabled during Trigger Sequence Mode.) SequenceModeFrame SQF5 Min to Max SQF5=[Param.]<CR><LF> Set the frame Count5 SQI5?<CR><LF> count of Sequence Roi Index5.
GO-2400M-PMCL / GO-2400C-PMCL SequenceModeNext SQNI4 Same as SQNI4=[Param.]<CR><LF> Set the index to be Index4 SequenceRoiIndex SQNI4?<CR><LF> displayed after executed Roi Index4. (Only enabled during Trigger Sequence Mode.) SequenceModeNext SQNI5 Same as SQNI5=[Param.]<CR><LF> Set the index to be Index5 SequenceRoiIndex SQNI5?<CR><LF>...
Page 77
GO-2400M-PMCL / GO-2400C-PMCL SequenceMode Width6 SQW6 Min to Max 1936 1936 SQW6=[Param.]<CR><LF> Set the width of SQW6?<CR><LF> Sequence Roi Index6. SequenceMode Width7 SQW7 Min to Max 1936 1936 SQW7=[Param.]<CR><LF> Set the width of SQW7?<CR><LF> Sequence Roi Index7. SequenceMode Width8 SQW8...
Page 78
GO-2400M-PMCL / GO-2400C-PMCL SequenceMode SQH6 Min to Max 1216 1216 SQH6=[Param.]<CR><LF> Set the height of Height6 SQH6?<CR><LF> Sequence Roi Index6. SequenceMode SQH7 Min to Max 1216 1216 SQH7=[Param.]<CR><LF> Set the height of Height7 SQH7?<CR><LF> Sequence Roi Index7. SequenceMode SQH8 Min to Max...
Page 79
GO-2400M-PMCL / GO-2400C-PMCL SequenceModeGain6 SQGA6 Min to Max 1600 SQGA6=[Param.]<CR><LF> Set the gain of SQGA6?<CR><LF> Sequence Roi Index6. SequenceModeGain7 SQGA7 Min to Max 1600 SQGA7=[Param.]<CR><LF> Set the gain of SQGA7?<CR><LF> Sequence Roi Index7. SequenceModeGain8 SQGA8 Min to Max 1600 SQGA8=[Param.]<CR><LF>...
Page 80
GO-2400M-PMCL / GO-2400C-PMCL SequenceMode SQHB4 1: Hbinning = OFF SQHB4=[Param.]<CR><LF> Set the horizontal Hbinning4 2: Hbinning = x2 SQHB4?<CR><LF> binning of (Mono model only) Sequence Roi Index4. (Mono only) SequenceMode SQHB5 1: Hbinning = OFF SQHB5=[Param.]<CR><LF> Set the horizontal Hbinning5 2: Hbinning = x2 SQHB5?<CR><LF>...
Page 81
GO-2400M-PMCL / GO-2400C-PMCL SequenceMode SQVB7 1: Vbinning = OFF SQVB7=[Param.]<CR><LF> Set the vertical Vbinning7 2: Vbinning = x2 SQVB7?<CR><LF> binning of (Mono model only) Sequence Roi Index7. (Mono only) SequenceMode SQVB8 1: Vbinning = OFF SQVB8=[Param.]<CR><LF> Set the vertical Vbinning8 2: Vbinning = x2 SQVB8?<CR><LF>...
GO-2400M-PMCL / GO-2400C-PMCL SequenceMode SQBL1 Min to Max –133 SQBL1=[Param.]<CR><LF> Set the black level BlackLevel1 SQBL1?<CR><LF> of Sequence Roi Index1. SequenceMode SQBL2 Min to Max –133 SQBL2=[Param.]<CR><LF> Set the black level BlackLevel2 SQBL2?<CR><LF> of Sequence Roi Index2. SequenceMode SQBL3 Min to Max –133...
Page 83
GO-2400M-PMCL / GO-2400C-PMCL SequenceMode SQPGB1 Min to Max –4533 17713 SQPGB1=[Param.]<CR><LF> Set the blue gain GainBlue1 SQPGB1?<CR><LF> of Sequence Roi (Color model only) Index1. SequenceMode SQPGB2 Min to Max –4533 17713 SQPGB2=[Param.]<CR><LF> Set the blue gain GainBlue2 SQPGB2?<CR><LF> of Sequence Roi (Color model only) Index2.
Page 84
GO-2400M-PMCL / GO-2400C-PMCL SensorMultiRoiWidth4 SMRW4 Min to Max 1936 1936 SMRW4=[Param.]<CR><LF> Set the width of SMRW4?<CR><LF> Sensor Multi Roi Index4. SensorMultiRoiHeight1 SMRH1 Min to Max 1216 1216 SMRH1=[Param.]<CR><LF> Set the height of SMRH1?<CR><LF> Sensor Multi Roi Index1. SensorMultiRoiHeight2 SMRH2 Min to Max...
GO-2400M-PMCL / GO-2400C-PMCL LUTMode LUTC 0: Off LUTC=[Param.]<CR><LF> Select the JAI LUT 1: Gamma LUTC?<CR><LF> mode. 2: LUT AlcSpeed ALCS Min to Max ALCS=[Param.]<CR><LF> Set the control ALCS?<CR><LF> speed for AGC and for AGC and ASC ASC (8 is the fastest).
Page 86
GO-2400M-PMCL / GO-2400C-PMCL ALCChannelArea ALCMLML 0: Off / 1: On Enable/disable MidLowMidLeft the Mid Low Mid Left photometry area. ALCChannelArea ALCMLL 0: Off / 1: On Enable/disable the MidLowLeft Mid Low Left photometry area. ALCChannelArea ALCMHR 0: Off / 1: On...
Page 87
GO-2400M-PMCL / GO-2400C-PMCL AWBChannelArea AWBLL 0: Off / 1: On Enable/disable LowLeft the Low Left photometry area. AWBChannelArea AWBMLR 0: Off / 1: On Enable/disable the MidLowRight Mid Low Left photometry area. AWBChannelArea AWBMLMR 0: Off / 1: On Enable/disable...
Page 88
GO-2400M-PMCL / GO-2400C-PMCL GpioPulseGenLength0 PGL0 Min to Max 1048575 PGL0=[Param.]<CR><LF> Set the maximum PGL0?<CR><LF> count up value using clock value. GpioPulseGenStart PGST0 Min to Max 1048574 PGST0=[Param.]<CR><LF> Set the start point Point0 PGST0?<CR><LF> for the High interval using clock value.
Page 90
GO-2400M-PMCL / GO-2400C-PMCL BINNING_GAIN_EN BGOE 0: Off / 1: On BGOE =[Param.]<CR><LF> Set whether to BGOE?<CR><LF> apply gain to the image during binning mode. PIrisLensControl 0: Off / 1: On PLC =[Param.]<CR><LF> Set this to [On] PLC?<CR><LF> when using a (GO-2400-AUX1(P-Iris) only) P-Iris lens.
Page 91
GO-2400M-PMCL / GO-2400C-PMCL PirisAutoStepMax PLSA Min to Max PLSA=[Param.]<CR><LF> Set the maximum PLSA?<CR><LF> value for the (GO-2400-AUX1(P-Iris) only) control range as a step number when controlling the P-Iris lens using auto iris. (This is only enabled when [P-IRIS Lens Select] is set to [OTHERS].)
GO-2400M-PMCL / GO-2400C-PMCL Settings For details on the setting items, refer to the JAI Control Tool User's Guide Item Setting range Default value 32-bit Factory Transport Layers Available 32-bit Transport Layers — JAI_GigE_Vision — Transport name — JAI_GigE_Vision Full path to cti file —...
GO-2400M-PMCL / GO-2400C-PMCL Miscellaneous Updates You can obtain the latest information on updates from the following URL. http://www.jai.com/EN/Partner/CameraInformation/Pages/Revision_Notes.aspx Registration and login are required for viewing. Check the version of the unit, and update if necessary. You can check the version of the unit under [Device Control] in the [Feature Properties] tab after starting Control Tool.
Page 96
GO-2400M-PMCL / GO-2400C-PMCL Item GO-2400M-PMCL GO-2400C-PMCL Gain adjustment Manual adjustment range 0 dB to +24 dB 0 dB to +24 dB 1 step = x0.01 (0.005 dB to 0.08 1 step = x0.01 (0.005 dB to 0.08 (varies by setting value)
GO-2400M-PMCL / GO-2400C-PMCL GO-2400C-PMCL 1000 wave length (nm) Dimensions 41.5 C Mount 12.5 23.7 4-M2 Depth 3 3-M3 Depth 3 Dimensional tolerance: ±0.3 mm Unit: mm ̶ 98 ̶...
Page 99
GO-2400M-PMCL / GO-2400C-PMCL Trademarks • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. • Intel and Intel Core are trademarks of Intel Corporation in the United States and other countries.