IAI GO-2400M-PMCL User Manual page 61

Access
Function name
type
Pulse Generator R/W 70.810386 to 74250000
Frequency (Hz)
Pulse Generator R/W 0 to 1048574
Start Point
Pulse Generator R/W 0 to 14.1222
Start Point (ms)
Pulse Generator R/W 1 to 1048575
End Point
Pulse Generator R/W 0.000013468 to 14.1222
End Point (ms)
Pulse Generator R/O 0 to 14.1222
pulse-width (ms)
Pulse Generator R/W 0 to 255
Repeat Count
Pulse Generator R/W Off [Off]
Clear Activation HighLevel [High Level]
LowLevel [Low Level]
RisingEdge [Rising Edge]
FallingEdge [Falling Edge]
Setting range Min. value
70.810386
0
0
1
0.000013468
—
0
—
̶ 61 ̶
GO-2400M-PMCL / GO-2400C-PMCL
Max. value Default value
74250000
4.8E+07
1048574
0
14.1222 0
1048575 1
14.1222 1.35E-05
— 1.35E-05
255
0
—
0: Off
Description
Set the maximum
count up value using
frequency.
This value is
calculated based on
the Pulse Generator
Length value.
Set the start point for
the High interval
using clock value.
When the counter
reaches this value,
the output becomes
1.
Set the start point for
the High interval
using ms.
When the counter
reaches this value,
the output becomes
1.
The setting range
varies depending on
the Clock Pre-Scaler
value.
Set the start point for
the Low interval using
clock value.
When the counter
reaches this value,
the output becomes
0.
Set the start point for
the Low interval using
ms.
When the counter
reaches this value,
the output becomes
0.
The setting range
varies depending on
the Clock Pre-Scaler
value.
Display High interval
width for the pulse in
ms.
This is a calculation
of the time between
the Start Point and
End Point.
The setting range
varies depending on
the Clock Pre-Scaler
value.
Set the repeat count
for the counter.
When this is set to 0,
the counter will be
free-running with
limitless repeating.
Set the clear signal
condition for the
count clear input of
the pulse generator.