Gain Control - IAI GO-2400M-PMCL User Manual

Tap Geometry
Horizontal ROI
1X2-1Y
(Full)
1X3-1Y
(Full)
1X4-1Y
(Full)
1X8-1Y
(Full)

Gain Control

[Analog All] can be used for gain control for both the monochrome and color camera. [Analog All]
(master gain) uses the sensor's internal gain function and consists of analog gain + digital gain.
Analog gain is used for lower gain, and analog gain + digital gain is used when the gain becomes
high. R and B can be configured individually as digital gain on the GO-2400C-PMCL.
™ For details on how to configure the settings, see "Adjusting the Gain" (page 22).
The relationship between the gain setting value, gain amplification, and dB value is as follows. For
example, a gain amplification of x5.62 will be 15 dB.
For monochrome
Gain Gain
Gain adjustment range (monochrome)
setting amplification
value
1600 x16
100 x1
Period From
CL Pixel Clock FVAL end to
(MHz) Exposure end
[X1] (usec)
ALL
37.125 143 to 169
74.25 64 to 77
84.85 59 to 72
37.125 104 to 124
74.25 29 to 39
84.85 40 to 48
37.125 64 to 78
74.25 32 to 40
84.85 30 to 37
37.125 32 to 40
74.25_8 24 to 29
74.25_10 32 to 39
84.85_8 7.3 to 12
84.85_10 33 to 39
24dB
0dB
̶ 39 ̶
Max Exposure [msec]
Framerate-13/H Freq

7999.658
7999.829
7999.838
7999.748
7999.886
7999.900
7999.828
7999.914
7999.919
7999.912
7999.937
7999.919
7999.937
7999.919
GO-2400M-PMCL / GO-2400C-PMCL
Min Exposure
[usec]
3H + 22 x 0.013
79
40
38
59
27
24
40
20
19
21
15
19
15
19