Step 4: Configuring Initial Settings For The Camera; Connecting To The Camera To Control Tool; Configuring The Output Format - IAI GO-2400M-PMCL User Manual

Step 4: Configuring Initial Settings for the Camera

Start Control Tool, connect the camera to the frame grabber board, and configure initial settings for the
output format, exposure, external trigger, etc.

Connecting to the Camera to Control Tool

1
Start JAI Control Tool.
Cameras connected to the frame grabber board are detected, and a window appears. If they do
not appear, right-click inside the window and select [Search for Cameras].
2
Select the camera you want to configure.
3
Check that the settings of the selected camera are displayed.

Configuring the Output Format

Configure the size, position, and pixel format of the images to be captured.
The factory default settings are as follows. Change the settings as necessary.
Factory default values
Image Format Control
™ You can specify the image capture area. For details, see "ROI (Regional Scanning Function)" (page 44).
Item
Width
Height
Offset X (horizontal position)
Offset Y (vertical position)
Pixel Format
̶ 16 ̶
GO-2400M-PMCL / GO-2400C-PMCL
Default value
1936 (pixels)
1216 (pixels)
0 (pixels)
0 (pixels)
GO-2400M-PGE: 8 Bit
Monochrome
GO-2400C-PMCL: 8 Bit Bayer RG