Settings List; Feature Properties - IAI GO-2400M-PMCL User Manual

Settings List

Feature Properties

: Settings that can only be configured when image capture on the camera is stopped.
Access
Function name
type
— —
a) Device Control
Device Vendor R/O —
Name
Device Model R/O —
Name
Device R/O —
Manufacturer Info
Device Version R/O —
Device Firmware R/O —
Version
Device Fpga R/O —
Version
Device SFNC R/O —
Version Major
Device SFNC R/O —
Version Minor
Device SFNC R/O —
Version SubMinor
XML Major R/O —
Version
XML Minor R/O —
Version
XML Sub Minor R/O —
Version
Device Serial R/O —
Number
Device User ID R/W —
Device R/O Mainboard
Temperature
Selector
Device R/O value ˚C
Temperature (C)
Device Reset W/O —
—
b) Image Format
Control
Sensor Width R/O 1936
Sensor Height R/O 1216
Sensor R/W Ten [10 Bit]
Digitization Taps Twelve [12 Bit]
Width Max R/O 1936
Height Max R/O 1216
Width R/W Min to (Max-OffsetX)
Height R/W Min to (Max-OffsetX)
Setting range Min. value
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
96
2
̶ 57 ̶
GO-2400M-PMCL / GO-2400C-PMCL
Max. value Default value
—
— JAI Ltd, Japan
— GO-2400M-PMCL
GO-2400C-PMCL
— Digital 2.4Mega Pexel
Progresshive Scan
—
Software Version
— Firm Ver. No.
— FPGA Ver. No.
— SFNCMajorVersion
— SFNCMinorVersion
— SFNCSubMinorVersion
—
XMLMajorVersion
— XMLMinorVersion
— XMLSubMinorVersion
— Varies by camera.
— blank
—
Mainboard
— value ˚C
—
—
—
— 1936
— 1216
—
12 Bit
— 1936
— 1216
1936 1936
1216 1216
Description
Display/configure
information related to
the device.
Display the
manufacturer name.
Display the model
name.
Display manufacturer
information.
Display the software
version.
Display the firmware
version.
Display the FPGA
version.
Display the SFNC
version.
Display the SFNC
version.
Display the SFNC
version.
Display the XML
version.
Display the XML
version.
Display the XML
version.
Display the device ID.
Set the user ID for the
camera.
Select the area of the
camera's interior for
which to display the
temperature sensor's
reading.
Display the internal
temperature (˚C) of
the camera.
Reset the device.
Configure image
format settings.
Display the maximum
image width.
Display the maximum
image height.
Displays the digital
tones output from the
sensor.
Display the maximum
image width.
Display the maximum
image height.
Set the image width.
Set the image height.