Sensor Multi Roi Function - IAI GO-2400M-PMCL User Manual

Index structure for Command Sequence
Index
Selector
(MUX)
Current
Index
Common Settings
Command Sequence Index (1 to 128)

Sensor Multi ROI Function

Sensor Multi ROI is an ROI function that is configured and functions inside the sensor.
You can configure up to 16 scanning regions (4 horizontal and 4 vertical).
By skipping areas that are not specified as regions of interest when scanning a frame, the sensor's ROI
function outputs the specified regions in a compressed state. You can increase the frame rate due to
the reduced scanning time for the compressed areas. However, you cannot make the line frequency
faster by compressing in the horizontal direction.
Total sensor area (1936 × 1216)
ROI 1-1
ROI 2-1
ROI 3-1
ROI 4-1
Restrictions
• The specified areas cannot overlap.
• The frame rate can be increased in relation to size of the area specified in the vertical direction, but
not in relation to the horizontal direction.
• In the horizontal direction, the configuration for the second and subsequent row will be identical. In
the vertical direction, the configuration for the second and subsequent column will be identical.
Index1
Index2
Index128 ROI128
ROI 1-2
ROI 1-3
ROI 2-2 ROI 2-3
ROI 3-3
ROI 3-2
ROI 4-3
ROI 4-2
Gain1
ROI1
Exposure1
(M/Red/Blue)
Gain2
ROI2 Exposure2
(M/Red/Blue)
Exposure Gain128
128 (M/Red/Blue)
Common Settings
The areas selected with the ROI function
will be compressed.
ROI 1-4
ROI 2-4
ROI 3-4
ROI 4-4
̶ 48 ̶
GO-2400M-PMCL / GO-2400C-PMCL
Black
Binning1
(H/V) Enable1
Level1
Binning2
Black
(H/V)
Level2 Enable2
Black Binning128
Level128 (H/V) Enable128
Sequence LUT mode
Horizontal pixel count
ROI Width 1 + ROI Width 2 +
ROI Width 3 + ROI Width 4
ROI 1-3
ROI 1-1 ROI 1-2
ROI 2-1
ROI 2-2 ROI 2-3
ROI 3-1 ROI 3-3
ROI 3-2
ROI 4-3
ROI 4-1
ROI 4-2
Vertical pixel count
ROI Height 1 + ROI Height 2 +
ROI Height 3 + ROI Height 4
LUT
LUT
LUT
ROI 1-4
ROI 2-4
ROI 3-4
ROI 4-4