IAI GO-2400M-PMCL User Manual page 67

Access
Function name
type
Sensor Multi Roi R/W 0 to 1840
Offset X
Sensor Multi Roi R/W 0 to 1214
Offset Y
Horizontal Enable R/W Off
On
Vertical Enable R/W Off
On
P-IRIS Lens R/W OTHERS [OTHERS]
Select LM16JC5MM [LM16JC5MM]
LM35JC5MM [LM35JC5MM]
CNG1P9M10 [CINEGON1.9/10]
CNG1P8M48
[CINEGON1.8/4.8]
CNGCOMPACTIRIS
[SCHNEIDER COMPACT
IRIS]
MG3518KC [MG3518KC]
VV1618HF_DN_P [VV1618HF
DN P]
P-IRIS Lens R/W Off
Control On
P-IRIS Step Max R/O 0 to 255
P-IRIS Position R/W 0 to
P-IRIS Auto R/W F_OPEN [Open]
Minimum F_No F_14 [F 1.4]
F_20 [F 2.0]
F_28 [F 2.8]
F_40 [F 4.0]
F_56 [F 5.6]
F_80 [F 8.0]
F_110 [F 11.0]
F_160 [F 16.0]
F_220 [F 22.0]
F_320 [F 32.0]
F_CLOSE [Close]
P-IRIS Auto R/W F_OPEN [Open]
Maximum F_No F_14 [F 1.4]
F_20 [F 2.0]
F_28 [F 2.8]
F_40 [F 4.0]
F_56 [F 5.6]
F_80 [F 8.0]
F_110 [F 11.0]
F_160 [F 16.0]
F_220 [F 22.0]
F_320 [F 32.0]
F_CLOSE [Close]
Setting range Min. value
0
0
—
—
—
—
0
0
—
—
̶ 67 ̶
GO-2400M-PMCL / GO-2400C-PMCL
Max. value Default value
1840
0
1214 0
—
Off
— Off
— OTHERS
— Off
255 74
Varies 0
depending
on lens
—
F 5.6
— F 1.4
Description
Set the Offset X of the
selected Sensor Multi
Roi Index.
Set the Offset Y of the
selected Sensor Multi
Roi Index.
Enable/disable the
Width/Offset X for the
selected Sequence
Multi Roi Index.
Enable/disable the
Height/Offset Y for
the selected
Sequence Multi Roi
Index.
Select the P-Iris lens
to be used.
(P-Iris models only)
Set this to [On] when
using a P-Iris lens.
(P-Iris models only)
Display the maximum
step number for the
P-Iris lens selected in
[P-IRIS Lens Select].
This is only enabled
when [P-IRIS Lens
Select] is set to a
setting other than
[OTHERS].
(P-Iris models only)
Set the iris position of
the P-Iris lens as a
step number.
(P-Iris models only)
Set the minimum
value for the control
range as an F
number when
controlling the P-Iris
lens using auto iris.
This is only enabled
when [P-IRIS Lens
Select] is set to a
setting other than
[OTHERS].
(P-Iris models only)
Set the maximum
value for the control
range as an F
number when
controlling the P-Iris
lens using auto iris.
This is only enabled
when [P-IRIS Lens
Select] is set to a
setting other than
[OTHERS].
(P-Iris models only)