IAI GO-2400M-PMCL User Manual page 87

AWBChannelArea R/W
LowLeft
AWBChannelArea R/W
MidLowRight
AWBChannelArea R/W
MidLowMidRight
AWBChannelArea R/W
MidLowMidLeft
AWBChannelArea R/W
MidLowLeft
AWBChannelArea R/W
MidHighRight
AWBChannelArea R/W
MidHighMidRight
AWBChannelArea R/W
MidHighMidLeft
AWBChannelArea R/W
MidHighLeft
AWBChannelArea R/W
HighRight
AWBChannelArea R/W
HighMidRight
AWBChannelArea R/W
HighMidLeft
AWBChannelArea R/W
HighLeft
CurrentAreaNoRequest R/O
AcquisitionFrameLine R/W
GammaSelector R/W
Temperature R/O
GpioPulseGenDivide Value R/W
AWBLL 0: Off / 1: On
AWBMLR 0: Off / 1: On
AWBMLMR 0: Off / 1: On
AWBMLML 0: Off / 1: On
AWBMLL 0: Off / 1: On
AWBMHR 0: Off / 1: On
AWBMHMR 0: Off / 1: On
AWBMHML 0: Off / 1: On
AWBMHL 0: Off / 1: On
AWBHR 0: Off / 1: On
AWBHMR 0: Off / 1: On
AWBHML 0: Off / 1: On
AWBHL 0: Off / 1: On
EA 0: Factory area
1: User 1 area
2: User 2 area
3: User 3 area
AR Min to Max
GMA
0(γ=0.45)/1(γ=0.60)/
2(γ=1.0)
TMP0 value
PGDEV Min to Max
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 1 1
0 3 0
1 325786 774
0 2 0
— — —
1 4096 1
̶ 87 ̶
GO-2400M-PMCL / GO-2400C-PMCL
Enable/disable
the Low Left
photometry area.
Enable/disable the
Mid Low Left
photometry area.
Enable/disable
the Mid Low Mid
Right photometry
area.
Enable/disable
the Mid Low Mid
Left photometry
area.
Enable/disable the
Mid Low Left
photometry area.
Enable/disable the
Mid High Right
photometry area.
Enable/disable
the Mid High Mid
Right photometry
area.
Enable/disable
the Mid High Mid
Left photometry
area.
Enable/disable the
Mid High Left
photometry area.
Enable/disable
the High Right
photometry area.
Enable/disable
the High Mid
Right photometry
area.
Enable/disable
the Mid High Left
photometry area.
Enable/disable
the High Left
photometry area.
EA?<CR><LF> Display the
The camera return the currently
latest used DATA configured User
AREA. Set Selector
status.
(Start up with the
state saved to this
area.)
AR=[Param.]<CR><LF> Not required.
AR?<CR><LF> Acquisition Frame
Maximum value is Period exists on
calcurated depending on 73rd line.
Height and Offset Y settings
GMA=[Param.]<CR><LF> Set the gamma
GMA?<CR><LF> value.
TMP0?<CR><LF> Display the internal
(Value÷128) = Temperature[˚C] temperature (˚C) of
the camera as a
x128 value.
PGDEV=[Param.]<CR><LF> Set the division
PGDEV?<CR><LF> value for the
prescaler (12-bit)
using the pixel
clock as the base
clock.