Table of Contents
Advertisement
®
JAI GigE
Vision Camera operation manuals
To understand and operate this JAI GigE
manuals.
User's manual (this booklet)
JAI SDK & Control Tool User Guide
JAI SDK Getting Started Guide
User's manual is available at
JAI SDK & Control Tool User Guide and JAI SDK Getting Started Guide are provided with the
JAI SDK which is available at www.jai.com.
Introduction
GigE Vision is the new standard interface using Gigabit Ethernet for machine vision
applications and it was mainly set up by AIA (Automated Imaging Association) members. GigE
Vision is capable of transmitting large amounts of uncompressed image data through an
inexpensive general purpose LAN cable for a long distance.
GigE Vision also supports the GenICam
(European Machine Vision Association). The purpose of the GenICam standard is to provide a
common program interface for various machine vision cameras. By using GenICam, cameras
from different manufactures can seamlessly connect in one platform.
For details about the GigE Vision standard, please visit the AIA web site,
www.machinevisiononline.org
JAI GigE Vision cameras comply with both the GigE Vision standard and the GenICam standard.
Before using GigE Vision camera
All software products described in this manual pertain to the proper use of JAI GigE Vision
cameras. Product names mentioned in this manual are used only for the explanation of
operation. Registered trademarks or trademarks belong to their manufacturers.
To use the JAI SDK, it is necessary to accept the "Software license agreement" first.
This manual describes necessary equipment and the details of camera functions.
Software installation
The JAI GigE Vision SDK & Control Tool can be downloaded from the JAI web site at
www.jai.com. The JAI SDK is available for Windows XP and Vista, 32-bit and 64-bit.
For the details of software installation, please refer to the "Getting Started Guide" supplied
on the JAI SDK download page.
AT-140GE
®
Vision camera properly, JAI provides the following
Describes functions and operation of the hardware
Describes functions and operation of the Control Tool
Describes the network interface
www.jai.com
TM
standard which is mainly set up by the EMVA
and for GenICam, the EMVA web site, www.genicam.org.
- 6 -
Advertisement
Table of Contents
