Step 5: Adjusting The Image Quality; Adjusting The Gain; Manual Adjustment - IAI GO-2400M-PMCL User Manual

Step 5: Adjusting the Image Quality

Adjust the image quality using the gain and white balance (GO-2400C-PMCL only) functions.
To adjust the image quality
The display level must be changed from [Beginner] to [Guru].

Adjusting the Gain

Adjust the sensitivity via the analog gain (i.e., master gain).
™ For details on gain control, see "Gain Control" (page 39) in the "Main Functions" section.

■ Manual adjustment

1
Expand [Analog Control], and set [Gain Auto] to [Off].
([Off] is the default setting.)
2
Configure the gain.
u Expand [Analog Control], and select the gain you want to configure in [Gain Selector].
• For the GO-2400M-PMCL, only [Analog All] (master gain) can be configured.
• For the GO-2400C-PMCL, [Analog All] (master gain), [Digital Red] (digital R gain), and
[Digital Blue] (digital B gain) can be configured individually.
v Configure the gain value in [Gain].
• The [Digital All] (master gain) can be set to a value from x1 to x16 (0 dB to +24 dB) the
analog base gain value. The resolution is set in x0.01 steps (0.05 dB to 0.08 dB depending
on the setting value). Values are configured by multipliers. For example, the values set for x1
and x16 are 100 and 1600 respectively.
• For the GO-2400C-PMCL, the [Digital Red] (digital R gain) and [Digital Blue] (digital B gain)
can be set to a value from x0.45 to x5.62 (
value. The resolution is set in 0.1 dB steps. Specify 0 for 0 dB, negative values for settings
below 0, and positive values for settings above 0.
7 dB to +15 dB) the [Digital All] (master gain)
–
̶ 22 ̶
GO-2400M-PMCL / GO-2400C-PMCL