Camera Output Format (Tap Geometry) - IAI SP-20000M-CXP2 User Manual

6.2

Camera output format (Tap Geometry)

Table - 13 Output format
Camera output format
1X–1Y
Note: The camera output description is based on GenICam SFNC Ver.1.5.1.
6.2.1 1X–1Y
1X–1Y is 1-tap readout system specified in GenICam Tap Geometry and it outputs as the following.
Tap 1
X1 X2
Y1 Y1
Pixel(0,0)
X1
Y2
X1
Y3839
X1 X2
Y3840 Y3840
SP-20000M-CXP2 / SP-20000C-CXP-2
Pixel format
8-bit, 10-bit, 12-bit, RGB 8-bit
X5 X6 X7 X8
X3 X4
Y1 Y1 Y1 Y1
Y1 Y1
X5 X6 X7 X8
X3 X4
Y3840 Y3840 Y3840 Y3840
Y3840 Y3840
Width = 5120 Pixels
Fig. 15
Refer to drawing
6.2.1
X5113 X5114 X5115
Y1 Y1 Y1
X5113 X5114 X5115
Y3840 Y3840 Y3840
1X–1Y output system
- 26 -
Step X = 1
X5120
X5116 X5117 X5118 X5119
X5120
Y1 Y1 Y1 Y1
Y1
Y1
X5120
Y2
X5120
Y3839
X5120
X5116 X5117 X5118 X5119
X5120
Y3840 Y3840 Y3840 Y3840
Y3840
Y3840