Camera Control Settings; Camera Control Tool; Camera Default Settings - IAI SP-20000C-USB User Manual

9. Camera Control Settings

9.1

Camera Control Tool

In the SP-20000-USB, control of all camera functions is done by the JAI SDK and Control Tool software.
All controllable camera functions are stored in an XML file inside of the camera. The JAI SDK and Control
Tool software can be downloaded from
9.2

Camera Default Settings

When the camera is connected to PC and JAI SDK 2.0 is started up, XML file which stores default settings
of the camera is downloaded to JAI_SDK camera control tool.
The default settings of SP-20000-USB is as follows.
Image Format
Acquisition Control
Trigger Selector
Trigger Overlap
Exposure Control
Gain
Gamma
Video Send Mode
SP-20000M-USB / SP-20000C-USB
www.jai.com.
Bit allocation
Width
Height
Binning Horizontal
Binning Vertical
Acquisition mode
Acquisition Frame Rate
Trigger Mode
Trigger Activation
Trigger Source
Exposure Mode
Gain
Gain Auto
- 95 -
8-bit
5120
3840
1(OFF)
1(OFF)
Continuous
16
Acquisition Start
OFF
Rising Edge
Low
OFF
OFF
1
OFF
0
Normal