Configuring The Device's Ldap Cache - AudioCodes Mediant 800B User Manual


To configure management groups and corresponding access level:
1. Open the LDAP Servers table (Setup menu > IP Network tab > RADIUS & LDAP
folder > LDAP Servers).
2. In the table, select the row of the LDAP server for which you want to configure
management groups with a corresponding access level, and then click the
Management LDAP Groups link located below the table; the Management LDAP
Groups table opens.
3. Click New; the following dialog box appears:
Figure 15-24: Management LDAP Groups Table - Add Dialog Box
4. Configure a group name(s) with a corresponding access level according to the
parameters described in the table below.
5. Click Apply, and then save your settings to flash memory.
Table 15-11: Management LDAP Groups Table Parameter Descriptions
Parameter
Index
[MgmntLDAPGroups_GroupIndex]
Level
level
[MgmntLDAPGroups_Level]
Groups
groups
[MgmntLDAPGroups_Group]

15.4.8 Configuring the Device's LDAP Cache

The device can optionally store LDAP queries of LDAP Attributes for a searched key with
an LDAP server and the responses (results) in its local cache. The cache is used for
subsequent queries and/or in case of LDAP server failure. The benefits of this feature
include the following:

Improves routing decision performance by using local cache for subsequent LDAP
queries

Reduces number of queries performed on an LDAP server and corresponding
bandwidth consumption

Provides partial survivability in case of intermittent LDAP server failure (or network
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the access level of the group(s).

[0] Monitor (Default)

[1] Admin

[2] Security Admin
Defines the attribute names of the groups in the LDAP server.
The valid value is a string of up to 256 characters. To define
multiple groups, separate each group name with a semicolon (;).
252
Mediant 800B Gateway & E-SBC
Description
Document #: LTRT-10298