1) Remove the manual upper guide link [1] (plastic E-
ring [2] and boss [3]).
F-8-292
2) Remove the screw [2], and detach the manual feed
guide [1].
F-8-293
3) Remove the connector cover [1] (snap-on).
F-8-294
4) Disconnect the connector [1].
5) Remove the 4 screws [2], and detach the manual
feed unit [3].
F-8-295
F-8-296
8.8.16 Manual Pickup Roller
8.8.16.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
Chapter 8
0007-6709
8-119