Canon iR4570 Series Service Manual page 768

Code Cause
0003 [Cause] An HD write abort error has
occurred. The sectors for BOOTDEV on
the HD cannot be read.
[Detection] BARSAC (all; at time of
bootable startup)
[Timing of Detection] once at startup
0006 [Cause] A subbootable that matches the
PDL type does not exit in BOOTDEV/
BOOT.
[Detection] during loading of sub boot in
oclibroot
[Timing of Detection] once at bootable
startup
0007 [Cause] An ICC profile that matches the
PDL type does not exist in BOOTDEV/
PDL.
[Detection] beginning of oclibroot;
judgment based on functions of PDL
team that are called in
[Timing of Detection] once at bootable
startup
01XX /DOSDEV is faulty.
02XX /FSTDEV is faulty.
03XX /DOSDEV2 is faulty.
04XX /FSTPDEV is faulty.
05XX /DOSDEV3 is faulty.
06XX /PDLDEV is faulty.
07XX /DOSDEV4 is faulty.
08XX /BOOTDEV is faulty.
09XX /DOSDEV5 is faulty.
FFXX There is an error in a partition that cannot
be identified.
E604 The image memory is faulty or is inadequate.
Remedy
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.