F-9-19
When mounting the harness cover [1], be sure to keep
the harness [2] within the space [3] indicated in the
figure so that the harness [2] will not come into
contact with the gear [4].
F-9-20
Do not touch the screw [1]. Turning it will change the
pressure of the fixing assembly, which cannot be
adjusted in the field, necessitating the replacement of
the fixing assembly.
F-9-21
9.5.2 Pressure Roller
9.5.2.1 Removing the Inside
Delivery Cover Unit
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the screw [1] and the stepped screw [2],
and detach the inside delivery cover unit [3].
F-9-22
Note 1
Point to note when removing the inside delivery
cover unit
Remove the inside delivery cover unit while
supporting the guide [1] in the arrow direction A and
opening it in the arrow direction B in the figure.
Otherwise, the guide may come off the inside delivery
Chapter 9
0007-7910
9-15