Removing The Packaging - Canon iR4570 Series Service Manual

Chapter 2
2.2
Unpacking
Installation
2.2.1
Unpacking

Removing the Packaging

Materials
iR2270 / iR2870 / iR3570 / iR4570
1) Unpack and remove the plastic bags.
- When installing a pedestal to the copier at the same
time, unpack it in the same way.
2) When installing the copier on the 2-cassette
Pedestal-Y2, open the right door [1] of the pedestal.
3) Hold the recesses [2] of the copier with 4 or more
people, and place it on the pedestal.
The maximum weight of the copier is approx. 80kg
(including the DADF), so be sure to lift it with 4 or
more people.
Memo: When placing the copier on the cassette
pedestal, be sure to align the two positioning pins [1]
to the holes on the base plate of the copier.
2-8
and
and
0006-6724
F-2-8
4) Close the right door of the pedestal (in the case of
the 2-cassette Pedestal-Y2).
5) Remove the packaging tapes and materials from
each unit.
- Front door
- Right door
- Manual feeder unit
- Cassettes 1 and 2
- Inside the cassettes 1 and 2
- DADF (In the case of the model with a DADF)
- Platen glass
6) When installing the copier to the 2-cassette
Pedestal-Y2, follow the installation procedure for
the 2-cassette Pedestal-Y2.
7) Remove the optical system fixing screw [1] at the
outside of the right cover in the reader unit. (Keep
the optical system fixing screw for future relocation
of the copier.)
F-2-10
8) Open the right door [1].
F-2-9