Canon iR4570 Series Service Manual page 905

Sub-
item
CL-CHK Checking DF clutch operation
<Operating procedure>
1) Press CL-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key
pad.
3) Press the OK key.
4) Press CL-ON to check DF clutch operation.
CL-ON Starting clutch operation
Press CL-ON. Then press the OK key to start clutch
operation. Press the OK key again to stop the operation.
(The operation stops automatically in two seconds but the
status changes to STOP only when the OK key is pressed
again.)
SL-CHK Checking ADF solenoid operation
<Operating procedure>
1) Press SL-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key
pad.
3) Press the OK key.
4) Press SL-ON to check ADF solenoid operation.
Part corresponding number
0: Pressurizing solenoid
1: Stamping solenoid
[Value at shipping: Factory adjustment value / Value
after RAM clearance: 0]
SL-ON Starting solenoid operation
<Operating procedure>
Operation specifications shall differ depending on the
model.
1) Press SL to reverse its display. Then press the OK key
to start solenoid operation.
2) Press the OK key again to stop the operation.
(The operation stops automatically in five seconds but the
status changes to STOP only when the OK key is pressed
again.)
FEEDER >FUNCTION
Description Level
1
1
1
1