Canon iR4570 Series Service Manual page 904

Sub-
item
MTR- Checking the ADF motor and other individually
CHK
<Operating procedure>
1) Press MTR-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key
pad.
3) Press the OK key.
4) Press MTR-ON to check the motor operation.
<Setting range>
0 to 1
TRY-A4 Automatically adjusting document width detection by DF
(A4 width)
TRY- Automatically adjusting document width detection by DF
A5R (A5R width)
TRY- Automatically adjusting document width detection by DF
LTR (LTR width)
TRY- Automatically adjusting document width detection by DF
LTRR (LTRR width)
FEED- Checking ADF paper feed operation
CHK
<Operating procedure>
1) Press FEED-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key
pad.
3) Press the OK key.
4) Press FEED-ON to check ADF paper feed operation.
Paper feed mode
0: Simplex feed
1: Duplex feed
2: Simplex feed with stamping
3: Duplex feed with stamping
[Value at shipping: Factory adjustment value / Value after
RAM clearance: 0]
T-16-47
FEEDER >FUNCTION
Description Level
1
1
1
1
1
1