Removing The Control Panel Frame - Canon iR4570 Series Service Manual

10.5.4.7 Removing the Control
Panel Frame
/ iR3530
1)Disconnect the flat cable [1] in the direction of the
arrow.
2)Move the connector stopper [2] in the direction of
the arrow, and disconnect the flat cable [3].
F-10-53
3)Disconnect the 3 connectors [1].
F-10-54
4)Free the harness from the 3 clamps [1].
F-10-55
5)Remove the 5 screws [1], and detach the control
panel hook [2].
0009-2848
F-10-56
6)Remove the self-tapping screws [1] and the flat-
head screw [2]; then, detach the control panel frame
[3].
F-10-57
Routing the Harness When Mounting the Control
Panel Frame
1.Check to be sure that the inverter harness is routed
[1] as shown in the figure.
Chapter 10
F-10-58
10-29