Canon iR4570 Series Service Manual page 911

Sub-item
SCANSLCT Turning ON or OFF the function of calculating a scan area from the
selected paper size
<Setting range>
0: OFF (Determining the scan area by document detection)
1: ON (Determining the scan area by paper size)
SENS-CNF Setting the arrangement of document detection sensors
<Setting range>
0: AB type [Default]
1: Inch type
2: A type
RAW- Setting whether or not to print out received data with no change
DATA If a received image has a problem, the problem is used to isolate the data
contents and image processing.
<Setting range>
0: Usual operation [Default]
1: Print out with no change
SHARP Changing the sharpness level (Setting the central value)
<Setting range>
1 to 5 [Default: 3]
COTDPC-D Saving the toner (Potential (VD) low)
<Setting range>
0: No saving [Default]
1: Down about 10%
2: Down about 20%
3: Down about 30%
RMT-LANG Changing the remote UI language from web
<Adjustment method>
Select a language code with the + or - key.
IFAX-LIM Limiting the number of output lines when a large amount of data has been
received by IFAX.
<Setting range>
0: No limit
0 to 999 [Default: 500]
COPIER > OPTION > BODY
Description
Lev
el
2
2
2
2
2
2
2