Fixing Unit - Canon iR4570 Series Service Manual

Chapter 9
9.5
Parts
Procedure

9.5.1 Fixing Unit

9.5.1.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
[2]
[1]
9.5.1.2 Removing the Right
Door
iR3570 / iR4570 / iR3530
1) Open the right door.
9-12
Replacement
0007-7874
[3]
[3]
[3]
[4]
F-9-6
0007-7879
2) Remove the screw [1], and detach the fixing plate
[2].
3) Remove the joint shaft [1], and free the extension
delivery unit [2] from the right door.
4) Disconnect the connector [1], and remove the reuse
band [2]; then, remove the 2 screws (M4x8; RS
tightening).
F-9-7
F-9-8
F-9-9