Canon iR4570 Series Service Manual page 896

COPIER > FUNCTION > PART-CHK
Sub-item
CL Specifying a clutch to check its operation
(Range: 1 to 6)
<Operating procedure>
1) Select this item.
2) Enter the code of the clutch from the ten-key pad.
3) Press the OK key.
4) Press CL-ON to check its operation.
CL-ON Starting the clutch operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in
the following pattern:
0.5-second ON ->10-second OFF -> 0.5-second ON -> 10-second
OFF -> 0.5-second ON -> OFF
MTR Specifying a motor to check its operation
(Range: 1 to 16)
<Operating procedure>
1) Select this item.
2) Enter the code of the motor from the ten-key pad.
3) Press the OK key.
4) Press MTR-ON to check its operation.
MTR-ON Starting the motor operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in
the following pattern:
20-second ON -> OFF
SL Specifying a solenoid to check its operation
(Range: 1 to 9)
<Operating procedure>
1) Select this item.
2) Enter the code of the solenoid from the ten-key pad.
3) Press the OK key.
4) Press SOL-ON to check its operation.
SL-ON Starting the solenoid operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in
the following pattern:
0.5-second ON -> 5-second OFF -> 0.5-second ON -> 5-second
OFF -> 0.5-second ON -> OFF
T-16-39
Description Level
1
1
1
1
1
1