Removing The Control Panel Key Switch Pcb - Canon iR4570 Series Service Manual

panel hook [2].
F-10-105
6)Remove the self-tapping screws [1] and the flat-
head screw [2]; then, detach the control panel frame
[3].
F-10-106
Routing the Harness When Mounting the Control
Panel Frame
1.Check to be sure that the inverter harness is routed
[1] as shown in the figure.
F-10-107
2.After mounting the control panel frame, be sure to
route the inverter harness through the edge saddle [1].
F-10-108
10.5.7.8 Removing the Control
Panel Key Switch PCB
/ iR3530
1)Remove the 5 self-tapping screws [1], and detach
the control panel key switch PCB [2].
F-10-109
10.5.8 Control Panel CPU PCB
10.5.8.1 Removing the Control
Panel
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the rubber cap [1], and remove the screw
[2].
Chapter 10
0009-2854
0007-7565
10-39