Removing The Right Door - Canon iR4570 Series Service Manual

Chapter 8
F-8-388
3) Remove the joint shaft [1], and free the extension
delivery unit [2] from the right door.
F-8-389
4) Disconnect the connector [1], and remove the reuse
band [2]; then, remove the 2 screws (M4x8; RS
tightening).
F-8-390
5) While freeing the hinge assembly [2], detach the
right door.
8-142
F-8-391
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right
door against the lug.
2) Engage the hinge [2] found on the top of the right
door with the hook found on the side plate.
F-8-392
When tightening the 2 screws used to fix the hinge in
place, be sure to close the right door first.
8.8.23.3 Removing the Right
Door
iR2270 / iR2870 / iR3530
0007-7366