Canon iR4570 Series Service Manual page 832

Code Detail Items
code
E514 0001
Stack delivery
motor error
0002
(Finisher-S1)
E530 8001
alignment
8002
(Finisher-S1)
Description
When the stack
retainer is
moving to
home position,
the return belt
escape HP
sensor does not
go on within
1.5 sec.
When the stack
retainer is
moving from
home position,
the return belt
escape HP
sensor does not
go off within
1.5 sec.
When the rear
aligning plate
is moving to
home position,
the HP sensor
is not
identified as
being ON
within 2000
msec after the
start of the
Rear
movement.
error
When the rear
aligning plate
is moving from
home position,
the HP sensor
is not
identified as
being OFF
within 1000
msec after the
start of the
movement.
Remedial action
Replace the finisher
controller PCB.
Replace the stack
delivery motor. Check
the stack delivery drive
mechanism.
Replace the finisher
controller PCB.
Replace the rear
alignment motor.
Check the rear aligning
plate drive unit. Check
the rear alignment HP
sensor.