Canon iR4570 Series Service Manual page 785

Hide thumbs Also See for iR4570 Series:

Table of Contents

A file system error has

There is poor contact of the

HDD, or a v.x Works system

error has occurred.

The HDD has poor contact.

The system software is designed so that a

recovery session will not run for the boot

partition unless you use safe mode in

combination with the SST.

1. Start up in safe mode, and execute full

formatting using the SST and re-install the

system software (System, Language,

RUI). Thereafter, turn off and then on the

2. If the symptom still exits after the

foregoing, suspect a fault on the HDD, and

replace the HDD and re-install the system

1. Check the cable and power supply

2. If the symptom still exits after the

foregoing, start up in safe mode, and

execute full formatting using the SST and

re-install the system software (System,

Language, RUI). Thereafter, turn off and

then back on the main power.

3. If the symptom still exits after the

foregoing, suspect a fault on the HDD, and

replace the HDD and re-install the system

This type of error is highly rare in relation

to read/write operations.

1. Check the cable and the power supply

2.If the symptom still exits after the

foregoing, suspect a fault on the HDD, and

replace the HDD and install the system

Chapters

Table of Contents

Ir 3570 series Ir 2870 series Ir 2270 series