Main Drive Assembly - Canon iR4570 Series Service Manual

Chapter 10
10.5
Parts
Procedure

10.5.1 Main Drive Assembly

10.5.1.1 Removing the Rear
Cover
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
[3] [1]
[1]
[1]
[1]
[1]
[1]
[1]
F-10-12
10.5.1.2 Removing the Main
Drive Assembly
iR3570 / iR4570 / iR3530
10-20
Replacement
0007-6423
[1]
[1]
[1]
[1]
[1]
[1]
[2]
0007-6424
1) Disconnect the connector [1], and free the harness
[2] from the wire saddle.
F-10-13
2) Remove the 4 screws [1], and detach the main drive
assembly [2].
F-10-14
Do not touch the screws that are glued in place.